Why the Cooling coolsculpting machine Is Different?
It is the non-invasive cooling of adipose tissue to induce Fat Dissolve - the breaking down of fat cells - to reduce body fat without damage to other tissues.
It is fundamentally different from other non- or minimally invasive modalities. Other methods of fat removal primarily involve necrotic cell death by damaging fat with heat, high-intensity focused ultrasound, or chemical injections. Each approach poses potential technical challenges, particularly with respect to targeting the right tissue depth and unintended damage to other structures close to or within the fat layer. The predictability of efficacy using these other techniques is also uncertain. In contrast, the Cool Fat Dissolve operation induces apoptosis only in fat cells to gently and gradually reduce the fat layer while preserving all other tissue.
As triglyceride in fats will be converted into solid in particular low temperatures, It uses advanced cooling technology to selectively target fat bulges and eliminate fat cells through a gradual process that does not harm the surrounding tissues, and reduce unwanted fat, When fat cells are exposed to precise cooling, they trigger a process of natural removal that gradually reduces the thickness of the fat layer. And The fat cells in the treated area are gently eliminated through the body's normal metabolism process, to eliminate unwanted fat.
What is the Ultrasound Cavitation operation?
It uses a 40kHz focused ultrasound cavitation effect, to cause tons of microscopic air bubbles to surround the fat cell membranes and with its resonant frequency, the bubbles cause a high enough to cause the fat cells to break up instantly.
The broken LEDcytes are then moved to the liver and safely metabolized out of the human body which is assisted by drinking a lot of water.
It produces fatty acids from adipocytes (fat-laden cells) due to a phenomenon known as stable cavitation, and increased cell permeability of the adipocytes. You get an increased flow of triglycerides. Furthermore, there is a breakdown of the fibers through mechanical action (jet stream). Finally, some content of adipocytes is metabolized by the liver and eliminated in the urine.
Pure RF energy is used to treat skin laxity by facial tightening and is best suited to patients with mild to moderate sagging of facial tissues, usually those in their mid-thirties to fifties.
It is commonly used to treat the forehead area(lifts brows and tightens forehead skin), under the eyes (thickens skin and tightens and lifts the upper cheek skin), cheeks (lifts slightly and diminishes enlarged pores), mid-face, jaw line (diminishes jowl and sagging along the jawline), and the neck (tightens skin and diminishes wrinkling of the neck).
You can get 9 benefits from this item:
1 Face and Neck Lifting & Remodeling
2 Tightening and lifting flaccid areas of the face
3 Reduces wrinkles / Lift Sagging Skin
4 Enhances luminosity of the skin
5 Fat Reduction
6 Body remodeling
7 Cellulite operation
and skin partial reconstruction
8 Increase Collagen Level
9 Tightening loose skin
Parameter
Rated input voltage:AC220V-240V 50HZ /AC110V-120V 60Hz
Rated input power:350VA
Cool cold slimming Vacuum
Power: Up to 200W
Cooling device output temperature:5~ -10°C
Cooling device output: 0-5Kpa
Cooling liquid: pure water
Cavitation frequency : 40KHz
Cavitation Power:up to 60W
Cavitation tip:60mm diameter
RF for BODY
RF frequency:3MHz
RF power:30W
RF for FACE
RF frequency:3MHz
RF power: 30W
Vacuum RF for body
Power supply output:66V
Frequency:3MHz
Power:30W
Package List
Main machine x1 unit
Cool Vacuum headx1
40KHz cavitation head x 1
RF head for BODYx1
RF head for FACEx1
Vacuum RF head x1
Cooling Membranes x10
Power supply wire x 1unit
Holder x 2
Key switch x 1
